Quick project answer
Document the review scope for office partition procurement checklist occupancy.
An office partition procurement checklist occupancy sensor zones review helps a project team connect flexible room division with the way a floor is actually used. Sensor coverage, meeting patterns and after-hours cleaning all affect how a movable partition should be planned. The notes below focus on confirmed product facts and on the drawing inputs a buyer can prepare before approval.
Start with the top-hung principle
Record the coordination scope for office partition procurement checklist occupancy.
The EBUNGE movable partition system is top-hung. It has no continuous floor running track or operating hardware in the finished floor along the partition line. That single characteristic shapes much of the procurement conversation.
Because the system is carried from above, the floor is not cut or damaged for a floor track. The floor remains physically uninterrupted by the maintained EBUNGE top-hung system. For an office suite, that matters when sensor zones, floor finishes and furniture layouts are being coordinated.
The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings. This boundary applies to every planning statement in this article.
Why a physically uninterrupted floor matters
An uninterrupted floor line gives the design team one less item to resolve at the partition location. Cable routes, floor boxes and finish transitions can be reviewed without assuming a track cut along the partition line.
Occupancy sensor zones are often drawn as simple areas on a plan. When a movable partition divides a suite, those zones may need to be reviewed against the open and closed positions of the panels.
The floor itself is not cut or damaged for a floor track under the confirmed top-hung arrangement. That fact should be recorded in the procurement notes so later trades do not assume otherwise.
Build the office partition procurement checklist occupancy sensor zones inputs
A useful checklist begins with the rooms the suite must support. List the open-plan condition, the divided condition and any intermediate arrangement the client expects to use.
Next, mark the sensor zones on the same plan as the partition line. Note which zones should remain active when the partition is open and which should be reviewed when it is closed.
Then record the parking intention. Panel parking style can be customized to the customer layout and project requirements, subject to coordinated drawings. A suitable approved parking arrangement can use the stacking area more compactly and coordinate with the space design.
Parking planning and the stacking area
Parking is a layout decision, not a default. The stacking area should be shown on the drawing with its relationship to walls, columns, doors and sensor zones.
A suitable approved parking arrangement can use the stacking area more compactly and coordinate with the space design. The exact track, support and panel layout still require project drawings.
Buyers should confirm who reviews the parking position and who signs off the coordinated drawing. The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
Finish selection and care coordination
Finish materials can be customized, and cleaning and maintenance methods vary with the selected finish. This is a coordination point rather than a fixed specification.
The procurement checklist should name the person who will confirm the finish direction and the person who will receive the care guidance for that finish. Care methods differ by finish, so a single generic instruction is not appropriate.
Record the finish decision against the drawing set. That keeps the office partition procurement checklist occupancy sensor zones review aligned with the approved layout.
Non-limiting application examples
Movable partitions can be used wherever flexible space division, combination or reconfiguration is required. Application examples are not limiting.
EBUNGE has completed many types of hotel-related movable-partition projects. Ballrooms, wedding halls and multifunction halls are non-limiting examples. No customer names, locations, quantities, ratings, certifications or outcomes may be inferred.
Office suites can follow the same planning logic when flexible division is required. The checklist remains the same: confirm the layout, the parking area, the finish direction and the drawing approvals.
Scannable checklist for the project team
- List the open, divided and intermediate room conditions the suite must support.
- Mark occupancy sensor zones on the same plan as the partition line.
- Show the proposed parking area and its relationship to nearby elements.
- Confirm the finish direction and the care method for that finish.
- Record the drawing reviewer and the approval route.
- Note that the floor is not cut or damaged for a floor track under the confirmed top-hung system.
Drawing approval sequence for buyers
- Issue the base plan with the partition line and sensor zones.
- Add the proposed parking area and stacking relationship.
- Confirm the finish direction and the care method for that finish.
- Review the coordinated drawing with the project team.
- Record the approved route, junction arrangement, overhead path and parking position.
Common questions from office fit-out teams
Does the EBUNGE movable partition system need a floor track?
No. The EBUNGE movable partition system is top-hung and has no continuous floor running track or operating hardware in the finished floor along the partition line.
Is the floor cut or damaged for a floor track?
The floor is not cut or damaged for a floor track and remains physically uninterrupted by the maintained EBUNGE top-hung system.
Can panel parking style be customized?
Yes. Panel parking style can be customized to the customer layout and project requirements, subject to coordinated drawings.
Can finishes be customized?
Finish materials can be customized, and cleaning and maintenance methods vary with the selected finish.
Where can movable partitions be used?
Movable partitions can be used wherever flexible space division, combination or reconfiguration is required. Application examples are not limiting.
What must be confirmed from the coordinated drawings?
The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
Where to go next
Review the movable partition range at /products/ and see completed work at /projects/. Both pages support the drawing-led approach described in this office partition procurement checklist occupancy sensor zones article.
Keep the checklist with the coordinated drawing set. The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
Continue Exploring
More Cost and Planning Guides
- Newer guideBallroom Partition Planning: Ceiling Rigging Motor Clearance
- Earlier guideTraining Center Movable Partition Checklist for Room Subdivision
- Related guideBenchmark a Movable Partition Tender Against Prior Award Data
- Related guideRead a Movable Partition Tender Pricing Schedule for Hidden