html body.single-post main#content.site-main{box-sizing:border-box!important;width:calc(100% – 32px)!important;max-width:900px!important;margin-left:auto!important;margin-right:auto!important;padding-left:0!important;padding-right:0!important}
Quick answer: partition track setting
Review focus: partition track setting.
In a partition track setting-out survey ceiling tolerances are not a single number to copy from a drawing. They describe how the overhead structure, the finished ceiling plane and the intended track route relate to one another before any panel is hung. Because EBUNGE movable partition panels are individually movable, suspended from a top track, cross the opening without a floor track and park at a planned stacking position, the ceiling interface becomes the controlling reference for the whole layout. A survey that records only room dimensions will usually miss the information the track route actually needs.
This article sets out a reading method for contractors, architects, interior designers, owners and renovation teams. It stays within confirmed product facts and treats every dimensional, support and acoustic question as project-specific. The suitability of each route and parking arrangement depends on the approved layout, circulation, ceiling interfaces and operating sequence.
Why the Ceiling Interface Drives the Survey
Project review term: partition track setting.
With a top-hung system, the panels carry their movement along an overhead route. There is no continuous floor running track or floor hardware along the partition line, so the floor does not provide a guiding reference.
That changes what a setting-out survey is for. It is not only confirming where the opening begins and ends.
What the survey is really recording
Each relationship needs a source, a date and a clear note about who confirmed it.
Reading Tolerances Without Inventing Values
Coordination scope: partition track setting.
Tolerance values cannot be assumed from a generic article or from a photograph. A survey should therefore record observed conditions and identified deviations, not propose limits that no one has verified.
When you read a setting-out drawing, separate three kinds of information: dimensions that are fixed by the design intent, dimensions that are still to be confirmed on site, and dimensions that depend on another trade’s work. Mixing these categories is a common cause of late coordination problems.
An evidence note for project teams
Do not derive hidden acoustic, fire, durability, load or maintenance performance from a visible ceiling condition, finish sample or drawing. Comparative, absolute and causal statements require matching project evidence. Where evidence is missing, state the confirmation boundary instead of filling the gap.
A Step-by-Step Setting-Out Review
Checklist focus: partition track setting.
The following sequence keeps the survey tied to visible evidence and to the confirmed product behaviour of a top-hung, floor-track-free system. It does not replace the project’s own engineering review.
- Confirm the intended route. Mark the straight, turning and stacking routes on the layout. Every proposed movement path requires a continuous connected overhead route and project-specific support review.
- Identify the ceiling interface zone.
- Measure and photograph. Note where the ceiling plane changes, where services penetrate, and where the track line passes close to walls or columns.
- Record deviations, not guesses. Log what was observed and who needs to confirm the resolution. Avoid writing tolerance values that have not been issued by the responsible designer.
- Check the parking position. Parking style is customized to the customer layout and project requirements, and may support compact stacking when the coordinated design permits it.
- Review pass-door requirements. Pass-door requirements and project documentation can be discussed with EBUNGE as part of the layout review.
- Issue a coordination note.
What to Put in a Survey Record
A useful record is short, dated and traceable. It should let a reviewer understand the ceiling interface without visiting the site, while making clear which items remain open.
| Record item | Why it matters | Status to state |
|---|---|---|
| Track route sketch | Shows straight, turning and stacking paths | Draft or confirmed |
| Ceiling interface notes | Describes soffit, finished plane and obstructions | Observed or to verify |
| Support review reference | Links the route to the responsible structural review | Open or closed |
| Parking position note | Confirms where panels will stack | Coordinated or pending |
| Finish and pass-door notes | Records approved surfaces and access needs | Discussed or confirmed |
Coordinating With Other Trades
Ceiling tolerances sit between trades. A setting-out survey is most useful when it becomes a shared reference rather than a single-discipline document.
For overseas projects, time zones and document versions add risk. Use drawing numbers, revision dates and a single point of contact for each trade. When a ceiling condition changes, reissue the affected part of the survey rather than relying on a verbal update.
Where finishes and acoustics fit
Confirmed finish options include laminate, melamine, fabric, leather, glass and other approved surfaces. Finishes affect appearance and coordination, but they should not be read as evidence of acoustic, fire or durability performance.
Common Misreadings to Avoid
- The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings.
- Copying tolerance values from another project without checking the current drawings.
- Leaving the parking position until after the track route is fixed.
- Using a finish sample as proof of performance rather than as a visual selection.
Frequently Asked Questions
What is a partition track setting-out survey?
It is a site and drawing review that records how the intended overhead track route relates to the ceiling interface, walls, openings and parking position. It supports coordination before installation planning is finalised.
Can ceiling tolerance values be taken from a standard table?
No. Tolerance values depend on the project’s structure, ceiling system, route and confirmed drawings. The survey should record observed conditions and open items, and the responsible designer should issue the values that apply.
Does a top-hung partition need a floor track?
EBUNGE movable partition panels are top-hung and move without a continuous floor running track or floor hardware along the partition line.
How should the parking position be surveyed?
Parking style is customized to the customer layout and project requirements and may support compact stacking when the coordinated design permits it. The survey should mark the intended stacking zone and note any conflicts with services or adjacent uses.
Can pass doors be included in the layout?
Pass-door requirements and project documentation can be discussed as part of the layout review. The position, swing and coordination with the track route should be confirmed in the project drawings.
What should be confirmed before fabrication?
Confirm the route, support condition, ceiling interface, parking position, finish selection and any pass-door requirements. Where information is missing, record it as an open item rather than assuming a value.
Conclusion and Next Step
Reading ceiling interface tolerances in a partition track setting-out survey is a discipline of evidence. Record what is visible, separate confirmed dimensions from open items, and keep the overhead route continuous and coordinated.
To review your layout, route and documentation, contact EBUNGE. You can also explore the movable partition wall range or review related project references before your next coordination meeting.
Continue Exploring
More Installation and Maintenance Guides
- Newer guideWho Owns the Ceiling Interface When Movable Partitions Meet Curved
- Earlier guideMovable Partition Renovation Phasing Reverse Handover
- Related guideWhat Ceiling Interface Drawings Should Show Before Partition Tracks Are
- Related guideWhat Records Close Out a Movable Partition Handover File?