Quick project answer
Contractor tender coordination partition stacking is a planning exercise that brings the partition package into the main tender before the stacking pocket becomes a fixed constraint. The EBUNGE movable partition system is top-hung and has no continuous floor running track or operating hardware in the finished floor along the partition line. That single principle changes how the tender documents describe the floor, the parking area and the interfaces that other trades must respect.
Start with the top-hung principle in the tender
The top-hung principle means the partition is carried from above rather than guided along the finished floor. For contractor tender coordination partition stacking, this is the first fact to place in the specification because it defines which surfaces remain clear. The floor is not cut or damaged for a floor track and remains physically uninterrupted by the maintained EBUNGE top-hung system.
Bidders should not price a floor track, a floor recess or operating hardware set into the finished floor along the partition line. Those items are outside the confirmed system description. The tender can instead ask each bidder to describe how the top-hung arrangement is coordinated with the surrounding construction, using the coordinated project drawings as the reference.
The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings. This boundary sentence belongs in the tender clarification list so that no bidder assumes a geometry that the drawings do not show.
Why the physically uninterrupted floor matters
A physically uninterrupted floor is a coordination outcome, not a decorative preference. When the floor is not cut for a track, the finished floor can run continuously through the partition line and into the stacking area. That continuity affects how the floor package, the partition package and the parking zone are sequenced in the tender.
Contractor tender coordination partition stacking should therefore identify the floor finish zone and the parking zone as separate but related areas. The tender can ask for a clear statement of who protects the floor during movement and who completes the floor in the parking area. The confirmed facts do not extend to protection methods or installation outcomes, so those items remain subject to project-specific agreement.
Because the floor remains physically uninterrupted, the tender does not need a floor-track allowance. Removing that allowance keeps the comparison between bids focused on the top-hung system and the parking arrangement rather than on a track that the confirmed system does not use.
Parking planning and stacking pockets
Panel parking style can be customized to the customer layout and project requirements, subject to coordinated drawings. A suitable approved parking arrangement can use the stacking area more compactly and coordinate with the space design. The exact track, support and panel layout still require project drawings.
For contractor tender coordination partition stacking, the stacking pocket should be described by its planning role rather than by assumed dimensions. The tender can require each bidder to show how the parking arrangement relates to the room envelope, the adjacent circulation and the finished floor. The drawings, not the tender narrative, confirm the final position.
The following checklist can be issued with the tender so that parking information is returned in a comparable form.
- Parking style proposed for the layout, with a reference to the coordinated drawing.
- Relationship between the stacking area and the finished floor zone.
- Points where the top-hung path meets other construction, shown on the drawing.
- Finish selection for the panels and the care method that follows from it.
- Drawing approvals required before any production or site activity.
The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings. A tender that repeats this boundary keeps the parking discussion at the planning level.
Finish and care coordination in the tender
Finish materials can be customized, and cleaning and maintenance methods vary with the selected finish. In contractor tender coordination partition stacking, the finish decision should be recorded before the parking layout is frozen because the two are reviewed together on the coordinated drawings.
The tender can ask for a finish schedule that names the selected finish and the care method that applies to it. It should not ask for a universal cleaning outcome or a single maintenance routine, because the confirmed position is that care varies with the finish. The suitability of each route and parking arrangement depends on the approved layout, circulation, ceiling interfaces and operating sequence.
Where the stacking pocket is visible in the finished space, the finish of the parked panels becomes part of the interior coordination. The tender can note that the parking arrangement should coordinate with the space design, while leaving the exact layout to the drawings.
Non-limiting applications and project context
Movable partitions can be used wherever flexible space division, combination or reconfiguration is required; application examples are not limiting. EBUNGE has completed many types of hotel-related movable-partition projects; ballrooms, wedding halls and multifunction halls are non-limiting examples.
For contractor tender coordination partition stacking, these examples help bidders understand the typical planning context without turning into a fixed scope list. A tender for a hotel-related space can reference the same top-hung principle and the same parking planning questions that apply to other flexible spaces.
No customer names, locations, quantities, ratings, certifications or outcomes may be inferred from that experience. The tender should therefore describe the project on its own terms and rely on the coordinated drawings for every geometric and layout decision.
Buyer inputs and drawing approvals
The table below shows the inputs that keep bids comparable without introducing unconfirmed performance claims.
| Input | What the bidder returns |
|---|---|
| Layout intent | How the space is divided, combined or reconfigured. |
| Parking approach | Proposed parking style and its drawing reference. |
| Floor condition | Confirmation that no floor track is assumed along the partition line. |
| Finish selection | Chosen finish and the care method that follows from it. |
| Drawing status | Approvals required before the next project stage. |
Drawing approvals are the point where the tender moves from intent to a coordinated set. The exact route, junction arrangement, continuous overhead path and parking position must be confirmed from the coordinated project drawings. Until that confirmation exists, the tender should treat parking and routing as open items.
Contractor tender coordination partition stacking works best when the top-hung principle, the uninterrupted floor and the parking layout are stated as planning facts and the drawings carry the geometry.
Frequently asked questions
Does the EBUNGE movable partition system need a floor track?
No. The EBUNGE movable partition system is top-hung and has no continuous floor running track or operating hardware in the finished floor along the partition line.
Is the floor cut or damaged for a floor track?
The floor is not cut or damaged for a floor track and remains physically uninterrupted by the maintained EBUNGE top-hung system.
Can the parking style be customized?
Panel parking style can be customized to the customer layout and project requirements, subject to coordinated drawings.
Can the stacking area be used more compactly?
A suitable approved parking arrangement can use the stacking area more compactly and coordinate with the space design. The exact track, support and panel layout still require project drawings.
Can finish materials be customized?
Finish materials can be customized, and cleaning and maintenance methods vary with the selected finish.
What applications are possible?
Movable partitions can be used wherever flexible space division, combination or reconfiguration is required; application examples are not limiting.
What experience does EBUNGE have?
EBUNGE has completed many types of hotel-related movable-partition projects; ballrooms, wedding halls and multifunction halls are non-limiting examples.
For related product information, see /products/. For project context, see /projects/. Contractor tender coordination partition stacking should end with a clear drawing approval step so that the top-hung system, the uninterrupted floor and the parking arrangement are reviewed together before the tender is closed.
Continue Exploring
More Cost and Planning Guides
- Newer guideCeiling Partition Track Interfaces: Tender Handover
- Earlier guideCoordinating Contractor Tender Handover for Movable Partition Track
- Related guideReview a Movable Partition Tender for Unclear Interface Ownership
- Related guideCompare Movable Partition Tender Returns When Bidders Bundle